Home > News

Maintenance of Easy Open End Making Machine Is Very Important

Jan. 23, 2019

Regularly check the parts of Easy Open End Making Machine and check them once a month to check whether the parts are rotating flexibly and worn. If defects are found, they should be repaired in time.

The deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.

Pay attention to the waterproof, moisture-proof and anti-corrosion of the electrical parts. The electrical control box and terminal block should be kept clean to prevent electrical failure.

When the equipment is stopped, the residual liquid in the pipeline should be flushed with clean water in time, and the machine should be cleaned in time to keep it dry and tidy.

The drum will move before and after the work. Please adjust the M10 screw of the front bearing to the proper position. If the shaft is turbulent, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley, and tighten it properly. If it is too tight or too loose, the automatic granule packing machine will be damaged. may.

In short, the maintenance and maintenance of Pick Fill Seal Machine is very important for the production and development of the enterprise. If the maintenance and maintenance of the packaging machine equipment can be carried out regularly, the failure rate of the equipment can be reduced to a large extent. We need to pay attention to it.

Easy Open End Making Machine

Contact us