Home > News

Maintenance Of Standup Pouch Packaging Machine

Aug. 16, 2018

1. The operator of the standup pouch packaging machine should always check whether the wire ends of the joints are loose before starting the machine;

2. Tiny particles such as dust may also affect some functions of the packaging machine. When the photoelectric switch or proximity switch probe is dusty, it may cause malfunction, so it should be checked and cleaned frequently.

3. The details of the part are also the focus of mechanical cleaning, such as regularly cleaning the surface of the horizontally sealed electric slip ring with soft gauze and alcohol to remove the toner on the surface.

4. Some parts of the automatic packaging machine cannot be changed at will. Non-professionals must not open the electrical part. The parameters or procedures of the inverter, microcomputer and other control components have been set. Any change will cause the system to malfunction and the machine will not work properly.

Lubrication of vertical packaging machines:

1. Rolling bearings are the parts with serious wear in the machine, so each rolling bearing should be greased once with a grease gun for about two months;

2. Different types of lubricating oils are different, such as the bushing on the wrapping roller of the packaging film, and the bushing at the front sprocket of the feeding conveyor should be filled with 40# mechanical oil;

3. The lubrication of the chain is the most common. Relatively simple, each sprocket chain should be infused with mechanical oil with a kinematic viscosity greater than 40#.

4. The clutch is the key to the start of the packaging machine, and the clutch part should be greased at the right time.

Standup Pouch Packaging Machine

Contact us