Home > News

Powder Packaging Line Operation Precautions A

Jan. 14, 2019

1. Before starting the Powder Packaging Line, check whether the specifications of the cup and the bag maker match the requirements.

2. Dial the main motor belt by hand to see if the automatic granule packing machine is running flexibly. When it is confirmed that there is no abnormality in the machine, it can be powered on.

3. Install the packaging material between the two paper rollers under the machine, and place it in the groove of the paper arm of the machine. The paper stopper should clamp the core of the material to make the packaging material and the bag maker correct. Then tighten the knob on the cover and ensure that the printed side is facing forward or the compound side is facing backwards. After starting the machine, adjust the axial position of the packaging material on the paper roll according to the paper feeding condition to ensure the paper supply is normal.

4. Turn on the main power switch of the machine which from Powder Packaging Line Supplier, press the clutch handle to separate the metering mechanism from the main drive, turn on the start switch, and the machine runs dry.

5. If the conveyor belt rotates clockwise, stop immediately. At this time, the main motor is reversed. After the motor is inverted, the belt is rotated counterclockwise.

6. Set the temperature and set the heat sealing temperature on the temperature controller of the electric control box according to the packaging materials used.

Powder Packaging Line

Contact us