Home > News

Precaution Of Spout Bag Sealing Machine

Sep. 03, 2018

1. Spout Bag Sealing Machine has the same power consumption, so the power of the input power source must be greater than the nominal power on the nameplate of the shrinking machine, otherwise it is easy to burn the line or electrical components.

2. The machine must be reliably grounded like a baler to protect personal safety.

3. Each heat shrink packaging machine is shipped with a cable connecting the power supply. The end lead part has the identification symbol of the power supply and must be connected correctly. Violation may result in electric shock.

4. When the specified voltage of the machine from Pick Fill Seal Machine Supplier is a three-phase 380V power supply, the zero line must be input at the same time, that is, the standard three-phase four-wire other packaging equipment is also like a vacuum packaging machine. Otherwise the machine will not work properly and it will easily burn internal electrical components.

5, the machine must be installed horizontally, otherwise it will shorten the service life of the electric heating tube. For machines with web belt transport, tilting the installation will cause the conveyor belt to be off center.

6. When the machine is used continuously for more than three months, the temperature-resistant wires of the shrinkage chamber should be inspected and replaced according to the degree of aging.

Spout Bag Sealing Machine

Contact us