Home > News

How To maintenance Shaped Bag Filling Sealing Machine?

Feb. 11, 2019

The Shaped Bag Filling Sealing Machine is suitable for quantitative packaging of rubber granules, plastic granules, fertilizer granules, feed granules, chemical granules, grain granules and metal granule sealing granules. So how do we use the packaging equipment we use for maintenance?

Regularly check the parts and check them once a month to check whether the parts are rotating flexibly and worn. If defects are found, they should be repaired in time.

The deactivation time is long, the machine must be wiped clean, the smooth surface of the machine is coated with anti-rust oil, and covered with a cloth.

Pay attention to the waterproof, moisture-proof and anti-corrosion of the electrical parts. The electrical control box and terminal block should be kept clean to prevent electrical failure.

When the Plastic Cup Fill Seal Machine is stopped, the residual liquid in the pipeline should be flushed with clean water in time, and the machine should be cleaned in time to keep it dry and tidy.

The drum will move before and after the work. Please adjust the M10 screw of the front bearing to the proper position. If the shaft is turbulent, please adjust the M10 screw on the back of the bearing frame to the appropriate position, adjust the clearance so that the bearing does not sound, turn the pulley, and tighten it properly. If it is too tight or too loose, the automatic granule packing machine will be damaged.

Shaped Bag Filling Sealing Machine

Contact us