Home > News

We Will Hold An Exhibition In October

Sep. 26, 2018

Our company will hold an exhibition in October. At that time, people from all walks of life are welcome to visit. Next, I will tell you about the operation precautions of the products in the exhibition.

1. When operating the PFS machine, if there is any dirt on the heating block and there is also a dirt in the sealing place, stop the machine and remove the dirt immediately. When the temperature of the sealing machine is too high, cut it. Do not touch the stolen goods directly with your hands.

2. When the temperature of the film is adjusted, the temperature gradually increases, and the debugging is gradually increased until the film sealing heat seal is suitable. The temperature cannot be adjusted from high to low, otherwise the heating wire is easily burned, and the electric heating tape and the rubber are burnt. .

3. When the Powder Packaging Line is stopped, it is strictly forbidden to idle the equipment. When the equipment is not operated for a long time, the operation of the machine should be shut down in time to avoid waste of resources on the equipment. When working on the sealing machine, do not put your hands on a high temperature cloth that is too hot to avoid injury.

4. When the sealing machine is not used for a long time, it should be cleaned regularly, and it is not allowed to contaminate the equipment on the equipment.

PFS machine

Contact us